Reversing The Door Stop - Whirlpool DDLX 70113 Health & Safety, Use & Care And Installation Manual

REVERSING THE DOOR STOP

If needed, the door stop of the dryer door can be
reversed . Use pliers and a cross-head screwdriver for
the procedure .
1.
Use pliers to turn the contact pin at the inside
of the door towards the right by 90° and pull it out .
2.
Unscrew the 2 screws above and below the
door lock system .
For removing and fixing the door, the help of a
second person is recommended . Make sure that the
dryer is unplugged . Open the dryer door .
3.
Press the small knob above the door lock with
a small screwdriver . At the same time move upwards
the door lock and pull it towards you with your
finger .
4.
Remove the 2 screws on the door hinge and
take off the door .
EN
25