Whirlpool DDLX 70113 Health & Safety, Use & Care And Installation Manual page 30

Below is a summary of possible failure causes and
solutions .
If the problem persists after having followed the
instructions as indicated below . If afterwards the failure
indication still appears, switch off and unplug the dryer
and contact our After-Sales Service .
Display message Possible Cause
F01 to F04
Failure of a component
F05 to F09
Failure of a component
F10 to F24 Failure of a component
30
Solution
Turn the programme selector to 0/OFF then at
least wait for 3 seconds .
Switch off and unplug the dryer . Immediately
open the door and take out the laundry, so
that the heat can dissipate.
Make sure that the ambient temperature ranges
between 5°C and 35°C . Wait for about an hour .
Plug in the dryer, load the laundry and start the
programme again .
If the failure persists, call the After-Sales Service .
Switch off and unplug the dryer . Wait for about
half an hour . Plug in the dryer and start the
programme again .
If the failure persists, call the After-Sales Service .