Failure Indicator And Messages - Whirlpool DDLX 70113 Health & Safety, Use & Care And Installation Manual

FAILURE INDICATOR AND MESSAGES

Make sure to
• Empty the water tank after each programme
• Clean the door filter after each programme
• Clean the bottom filter about every two months
Failure Indicator
The empty "Water Tank" lights on
The "Bottom Filter" lights on
The "Door Filter" lights on
Refer to section CARE AND MAINTENANCE for
emptying water tank or cleaning filters .
Possible Cause
Water tank may be
• filled with water
• not correctly positioned
Bottom filter may be
• blocked by lint
• not correctly positioned
Door filter may be
• blocked by lint
• not correctly positioned
Solution
• Empty water tank; make sure to
insert it properly afterwards .
• Push in the water tank to make
sure that it is correctly inserted in
the tank compartment .
• Clean the bottom filter;
make sure to insert it properly
afterwards
• Push in the bottom filter and
move the release levers into
vertical position, to make sure
that the filter is correctly inserted
in the filter compartment . Close
the flap .
• Remove and clean the door
filter; make sure to insert it
properly afterwards so that it
completely integrates in the filter
compartment .
• Check position of the door
filter; make sure that it is properly
inserted in the filter compartment .
EN
29