Furuno FSV-85 Installation Manual page 14

1. HOW TO INSTALL THE SYSTEM
Stay
Eye-bolt
HULL UNIT
After you install the hull unit, attach the double-end ratchet wrench to the location
shown in the figure below.
Handle fixing plate 1
10-086-5741
1-6
WRONG INSTALLATION METHOD:
Stay fixed to crossbeam on overhead
CORRECT INSTALLATION METHOD:
Stay installed horizontally
90°
Double-end ratchet wrench
RN2430L
Handle fixing plate 2
10-086-5742
Wing bolt
M4x10, 2 pcs.
Pan head screw
M4x10, 2 pcs.