Operation - Makita HR2430 Instruction Manual

OPERATION
Drilling with dust extractor attachment
In drilling operation, hold the tool so that the
top end of the dust extractor attachment is
always kept in complete contact with the
surface of concrete.
CAUTION:
Any space between them would result in a considerable loss of dust extracting power.
Cleaning out dust bag
Remove the dust bag from the tool.
Pull the fastener out of the dust bag, and
then remove dust or particles to clean out
the dust bag.
7
Fastener
CAUTION:
Too much dust in the dust bag would result in a considerable loss of dust extracting power.
Accordingly, clean out the dust bag from time to time.
Drilling without dust extractor
attachment
This tool can be also used as a standard
rotary hammer without the dust extractor
attachment and the dust bag.
Dust exhaust port
Before drilling operation without the dust extractor attachment and the dust bag, plug the
hose port with the cap provided.
The cap reduces the exhaust air from the dust exhaust port for your comfortable operation.
12