Makita HR2430 Instruction Manual page 10

Adjusting the position of dust extractor
I
attachment
Loosen the clamp screw of the dust ex-
tractor attachment by turning it counter-
clockwise.
And then align the tip of the bit with the
top of the dust extractor attachment.
Tighten the clamp screw by turning it
clockwise to secure the dust extractor
attachment.
Clamp screw
-/
I
Depth adjustment
Loosen the screw
of
the stopper by turning
it counterclockwise so that the stopper
could slide on the depth gauge of the dust
extractor attachment. Slide the stopper to
the desired drilling depth of the gauge, and
then tighten the screw by turning it clock-
wise.
Stopper
-
10