Makita HR2430 Instruction Manual page 9

Rotary hammer with dust extraction

Hide thumbs Also See for HR2430:

Installing

dust

extractor attachment

Loosen the clamp screw of the side grip

by turning it counterclockwise. Insert the

coupling rod of the dust extractor attach-

ment through the coupling hole of the side

grip until the rod cannot be pushed in any

further. And the tighten the clamp screw

clockwise to secure the dust extractor at-

tachment. The coupling rod can be inserted

from either side A or

Clamp screw

Coupli?g hole

CAUTIO N :

At some angles of the side grip with the tool, the dust extractor attachment cannot be

installed on the tool because of the interference between the attachment and the tool.

Insert firmly the hose of the dust extractor

attachment into the hose port of the tool

until the hose hits against the bottom of the

port to be fixed firmly to the tool.

Installing dust bag

Keeping the angle of the dust bag with the

tool at

SO",

insert the dust bag into the dust

exhaust port of the tool. Secure the dust bag

by turning

clockwise.

r-- Hose

Dust exhaust port

Table of Contents

Hr2431