Srrp Cli Commands - Avaya P332GT-ML Installation And Configuration Manual

• The main difference between the VRRP and SRRP is the capability of the first
protocol to provide mutual redundancy among any number of routers
supporting the protocol while the SRRP is one direction protocol

SRRP CLI Commands

In order to...
Configure SRRP options, activate
SRRP and enter the SRRP
configuration mode
Disable SRRP
Backup an additional interface of
the main router using the SRRP
application
Configure the polling interval in
seconds used by SRRP
Set the polling interval used by
SRRP back to default
Configure the timeout after which
SRRP declares the main router dead
if it does not reply to polling
Set back to default the timeout after
which SRRP declares the main
router dead if it does not reply to
polling
Display the SRRP configuration
and status
Avaya P332GT-ML User's Guide
Chapter 12 Avaya P330 Layer 3 Features
Use the following command...
router srrp
no router srrp
ip srrp backup
poll-interval
no poll-interval
timeout
no timeout
show ip srrp
111