Allnet ALL0279DSLA Quick Install Manual

802.11g / 802.11b wireless access point adsl modem nat router wps 4-port switching hub
Hide thumbs Also See for ALL0279DSLA:

Advertisement

Quick Links

ALL0279DSLA/ALL0279DSL
802.11g/802.11b Wireless Access Point
ADSL Modem
NAT Router
WPS
4-Port Switching Hub

Quick Install Guide

This guide covers only the most common
situations. Please refer to the full User Manual
on the CD-ROM if your LAN has any of the
following:
• Router
• Existing DHCP Server
• PCs using Fixed (Static) IP Addresses
P/N 957YHY0030

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ALL0279DSLA and is the answer not in the manual?

Questions and answers

Summary of Contents for Allnet ALL0279DSLA

  • Page 1: Quick Install Guide

    ALL0279DSLA/ALL0279DSL 802.11g/802.11b Wireless Access Point ADSL Modem NAT Router 4-Port Switching Hub Quick Install Guide This guide covers only the most common situations. Please refer to the full User Manual on the CD-ROM if your LAN has any of the following: •...
  • Page 2: Physical Installation

    Requirements • ADSL service, and an ISP account. • Standard Network cables. • TCP/IP network protocol installed on each PC. • Wireless Access Point requires Wireless devices compli- ant with the IEEE802.11b or IEEE802.11g specifications. Setup Physical Installation 1. Ensure the Wireless ADSL Router is powered OFF. 2.
  • Page 3 5. Check the LEDs • The Power LED should be ON. • For the LAN (PC) connection, one of the LAN LEDs should be ON (provided the PC is also ON.) • The ADSL LED should be ON if ADSL line is connected. •...
  • Page 4 Connection Type Data required. Dynamic IP Address Usually, none. Specified (Fixed) IP Address allocated to you, and IP Address, or related information. IPoA (IP over ATM) PPPoE, PPPoA Login name and password. If using a fixed IP address, the IP address and related information.
  • Page 5 Internet Access For Windows 98/ME/2000 1. Select Start Menu - Settings - Control Panel - Internet Options. 2. Select the Connection tab, and click the Setup button. 3. Select "I want to set up my Internet connection manually, or I want to connect through a local area network (LAN)" and click Next.
  • Page 6 Macintosh Setup 1. Open the TCP/IP Control Panel. 2. Select Ethernet from the Connect via pop-up menu. 3. Select Using DHCP Server from the Configure pop-up menu. The DHCP Client ID field can be left blank. 4. Close the TCP/IP panel, saving your settings. If using manually assigned IP addresses instead of DHCP, the required changes are: •...
  • Page 7: Wireless Setup

    Wireless Setup In order to use the Access Point in the Wireless ADSL Router, other Wireless devices must use the same SSID and Wire- less Security settings as the Wireless ADSL Router. The Wireless ADSL Router's default settings are as follows. Setting Wireless ADSL Router SSID...

This manual is also suitable for:

All0279dsl

Table of Contents