Panel Facilities - Pioneer PDP-434CMX Service Manual

1

8. PANEL FACILITIES

MAIN UNIT
A
PDP-504CMX
B
C
3 4 5
Main unit
1 Display stand
2 Remote control sensor
Point the remote control toward the remote sensor to
operate the unit .
D
3 Ambient light sensor
This sensor measures the level of light inside the viewing
room; it is enabled when the [ENERGY SAVE] option is
set to [AUTO] .
4 ON indicator
Lights green when the plasma display is operating.
When flashing, the indicator is used to indicate error
messages.
The indicator flashes green once every two seconds
when the [POWER MANAGEMENT] function is operating.
E
5 STANDBY indicator
Lights red when the unit is in standby mode.
When flashing, the indicator is used to indicate error
messages.
6 Handles
The plasma displays PDP-50MXE1/PDP-50MXE1-S and
PDP-43MXE1/PDP-43MXE1-S utilize differing methods
of handle attachment, but the handles themselves are
used in the same way.
Operation panel on the main unit
F
7 STANDBY/ON button
Press to put the display in operation or standby mode.
186
1
2
504CMX 434CMX
Inner
side
6
Grip attachment position
2
1
PDP-504CMX/1
2
3
Inner
side
-
Note
When optional speakers have been connected,
the operation panel on the main unit will not be
operable.
Operation panel on the main unit
8 INPUT button
Press to select the input.
9 MENU button
Press to open and close the on-screen menu.
0 ADJUST ( 5 / ∞ / 3 / 2 ) buttons
Use these buttons to move the onscreen cursor between
selection options, and to perform adjustments.
Instructions for use are given with each command option
onscreen.
- VOLUME (+/–) buttons
When not indicated for use in onscreen menu items,these
buttons are used for adjusting the sound volume.
= SET/DISPLAY button
Use to confirm onscreen menu selections, and to change
settings.
When not indicated by onscreen menus, used to display
the current set status.
~ SCREEN SIZE button
Press to select the screen size.
! AUTO SET UP button
When using computer signal input, automatically sets
the [POSITION], [CLOCK] and [PHASE] to optimum
values.
3
4
7
8
9
0
=
~
!
4