Pioneer PDP-434CMX Service Manual page 188

1
CONNECTION PANEL (VIDEO CARD SECTION: PDA-5003, PDA-5004)
When installing PDA-5003
A
When installing PDA-5004
B
Video Card <PDA-5003> Section
The video card is provided with 3 video input connectors,
1 video output connector, and 2 audio input connectors.
Consult the pages noted in parentheses ( ) for details
regarding connections to the various jacks and connectors.
~ S-VIDEO (INPUT3) (S-video jack)
For connection of components that have an S-video
C
output jack such as a video deck, video camera, laser
disc player, or DVD recorder).
! VIDEO IN (INPUT4) (BNC jack)
For connection of components that have a composite
video output jack such as a video deck, video camera,
laser disc player, or DVD recorder.
@ VIDEO OUT (INPUT4) (BNC jack)
Use the VIDEO OUT (INPUT4) jack to output the video
signal to an external monitor or other component.
Note: The video signal will not be output from the VIDEO
OUT (INPUT4) jack when the main power of this display
D
is off or in standby mode.
# AUDIO R/L (INPUT3/4) (RCA Pin jacks)
Use to obtain sound when INPUT3 or INPUT4 is selected.
Connect these jacks to the audio output connectors of
components connected to the video card's INPUT3 or
INPUT4.
Note: The left audio channel (L) jack is not compatible
with monaural input sources.
$ ANALOG RGB (INPUT5) (BNC jacks)
For connecting components equipped with RGB outputs
jacks, such as a personal computer or external RGB
E
decoder; or components equipped with component output
jacks, such as a DVD recorder.
Make sure that the connection made corresponds to the
format of the signal output from the connected component.
% AUDIO R/L (INPUT5) (RCA Pin jacks)
Use to obtain sound when INPUT5 is selected. Connect
these jacks to the audio output connectors of components
connected to the video card's INPUT5.
Note: The left audio channel (L) jack is not compatible with
monaural input sources.
F
188
1
2
INPUT3 INPUT4 AUDIO
S-VIDEO VIDEO INPUT 3/4
IN OUT R L G(ON SYNC)
~ ! @ #
INPUT3 INPUT4
S-VIDEO AUDIO VIDEO
R L IN OUT
^ & * (
PDP-504CMX/1
2
3
INPUT5
ANALOG RGB AUDIO
B R HD (H/V SYNC) VD R L
$ %
COMPONENT
INPUT5
AUDIO AUDIO
VIDEO
R L Y Pb/Cb Pr/Cr R L
) _ +
Video Card <PDA-5004> Section
The video card is provided with 3 video input connectors,
1 video output connector, and 3 audio input connectors.
Consult the pages noted in parentheses ( ) for details
regarding connections to the various jacks and connectors.
^ S-VIDEO (INPUT3) (S-video jack)
For connection of components that have an S-video output
jack such as a video deck, video camera, laser disc player,
or DVD recorder.
& AUDIO R/L (INPUT3) (RCA Pin jacks)
Use to obtain sound when INPUT3 is selected. Connect
these jacks to the audio output connectors of components
connected to the video card's INPUT3.
Note: The left audio channel (L) jack is not compatible with
monaural input sources.
* VIDEO IN (INPUT4) (RCA Pin jack)
For connection of components that have a composite
video output jack such as a video deck, video camera,
laser disc player, or DVD recorder.
( VIDEO OUT (INPUT4) (RCA Pin jack)
Use the VIDEO OUT (INPUT4) jack to output the video
signal to an external monitor or other component.
Note: The video signal will not be output from the VIDEO
OUT (INPUT4) jack when the main power of this display is
off or in standby mode.
) AUDIO R/L (INPUT4) (RCA Pin jacks)
Use to obtain sound when INPUT4 is selected. Connect
these jacks to the audio output connectors of components
connected to the video card's INPUT4.
Note: The left audio channel (L) jack is not compatible with
monaural input sources.
_ COMPONENT VIDEO (INPUT5) (RCA Pin jacks)
For connection of components that have component video
output jacks such as a DVD recorder.
+ AUDIO R/L (INPUT5) (RCA Pin jacks)
Use to obtain sound when INPUT5 is selected. Connect
these jacks to the audio output connectors of components
connected to the video card's INPUT5.
Note: The left audio channel (L) jack is not compatible with
monaural input sources.
3
4
4