GreenWorks 2600202CT Owner's Manual page 9

ELECTRICAL
W A R N I N G
Keep the extension cord clear of the working area. Position the cord so that it will not get caught on
lumber, tools, or other obstructions while you are working with a power tool. Failure to do so can
result in serious personal injury.
• Inspect the extension cord and the power cord on a regular basis. Look for deterioration,
cuts, or cracks in the insulation. Inspect the connections for damage. Repair or replace the
extension cord or the power cord if any damage is found.
• Verify that the impeller and all moving parts have come to a complete stop, and disconnect
the snow thrower from the power supply in order to prevent accidental start-ups before
cleaning or performing any inspections or repairs.
• Do not abuse the cord. Do not carry the snow thrower by the power cord or pull on the cord in
order to disconnect it from the receptacle.
• Keep the extension cord away from heat, oil, and sharp edges in order to prevent damage.
• If the extension cord is damaged in any manner while it is plugged in, disconnect it from the
outlet immediately.
• Prevent any possible disconnection of the power cord from the extension cord while the
snow thrower is in use by using the cord retainer. Refer to the section entitled Using the Cord
Retainer.
• Unplug the snow thrower and allow it to cool down before putting it into storage. Store the
snow thrower indoors.
• Unplug the snow thrower when it is not in use and before performing any maintenance or
repairs.
SAVE THESE INSTRUCTIONS
9