Connection To The Computer - Hagstrom KE-USB36FS User Manual

The KE-USB36FS uses standard system drivers for its functions.
When using the unit for the first time on your computer, USB
drivers will be loaded for the device.
Figure 2 - Connection of
the USB cable to computer
into the computer or hub USB connector.
The KE-USB36FS may be
connected to the computer
with power on or off. If
"hot plugged," the unit
will generally take several
seconds to become fully
active on your system.
Note: The first time you
use the KE-USB36FS with
a particular computer, the
system will load the appropriate drivers for the device. Follow
the default selections to load the standard drivers for the KE-
USB36FS.
The KE-USB36FS is powered directly from the USB port, so no
external power is required.
The KE-USB36FS is compatible with all operating systems which
offer full support for standard USB keyboard and mouse devices.

Connection to the Computer

The KE-USB36FS attaches to the computer's
USB port. Use a standard A-B Male/Male
type USB connecting cable from the KE-
USB36FS to the USB port on the computer.
The KE-USB36FS may be connected
directly to the USB port on the computer or
through a compliant USB Hub.
Connect the type "B" end of the USB cable
into the KE-USB36FS and the type "A" end
Figure 3 - Connection of the USB cable to the USB
5
port of the KE-USB36FS.