Table of Contents
Advertisement
To save the configuration to disk, select File, then Save As, and
specify a file name. Configurations saved at a prior time may be
recalled by using the Open selection and choosing a file from the
selection list.
To save the configuration to the KE-USB36FS, select File, then
. Be sure that the KE-USB36FS is connected to
Write to KEUSB36FS
the computer prior to this step. Once loaded, the new configuration
will take effect on the KE-USB36FS.
The configuration is stored on the KE-USB36FS in non-volatile
memory. Once a configuration is loaded into the unit, it will
remain set (even during power off) until changed by the user.
To retrieve an existing configuration from the KE-USB36FS, select
File, then
. Be sure that the KE-USB36FS
Read from KE-USB36FS
is connected to the computer prior to this step. Once loaded, the
program window will display the device's current configuration.
Note: Loading a configuration from the KE-USB36FS will overwrite
any existing configuration settings in the program window.
15
Advertisement
Table of Contents
