Table of Contents
Advertisement
When configured as shown above, Input #1 would perform a
Shift function along with the F1 keystroke. This combination would
be the equivalent of holding down the shift key on your keyboard
and then pressing F1.
Note that the Control, Alt, and Shift selection boxes are used in
combination with a key. If an input is to emulate only a Control,
Alt, or Shift, do not use these check boxes. Use the keys from
the Key selection diagram to program an input as one of these
modifiers keys (Control, Alt, or Shift).
If the input is to produce a repeated keystroke when held active,
the check box for the repeat function may be selected. When
active, the repeat function will perform a repeat of the selected
key exactly how your standard keyboard would handle a key held
down. The computer keyboard settings dictate the repeat speed.
Trackball Adustments
When the KE-USB36FS Auxiliary port is used for a trackball, there
are several option sthat may be selected with checkboxes shown
on the KE-USB36FS configuration program screen. These options
allow for tailoring the trackball response to the type of trackball
13
Advertisement
Table of Contents
