Table of Contents
Advertisement
Rotary-5 Mode
Using the KE-USB36FS auxiliary port with a Rotary-5 unit provides
5 channels of rotary encoder switch interface. Each of the channels
can be programmed to send a keystroke for each direction of the
rotary encoder device attached to the Rotary-5.
Use the MTA100-8/5-36FF cable to attach from the KE-USB36FS
to the Rotary-5. The supplied KE-USB36FS configuration program
is used to enable the Rotary-5 function on the auxiliary port.
Select the checkbox to enable the Rotary-5 functions in the KE-USB36FS configuration program.
In this configuration, the KE-USB36FS delivers the required power
to the Rotary-5 for operation. Refer to the Rotary-5 manual for
instructions on connecting rotary encoders to the terminal block
connections on the board.
Under each rotary encoder channel, the keystroke for each
direction may be assigned under the "A" and "B" selections for
each channel.
9
Advertisement
Table of Contents
