Connection To The Computer - Hagstrom KE-USB36 User Manual

Connection to the Computer

Figure 2 - Connection of
the USB cable to PC
The KE-USB36 may be connected to the computer with power
on or off. If "hot plugged," the unit will generally take several
seconds to become fully
active on your system.
Note: The first time you
use the KE-USB36 with
a particular PC, you will
be prompted to load the
appropriate drivers for the
device. Follow the default
selections to
standard drivers for the KE-
USB36.
The KE-USB36 is powered directly from the USB port, so no
external power is required.
The KE-USB36 is compatible with operating systems which offer
full support for USB devices compliant to USB 1.0 specifications.
Consult the operating system manufacturer for information on
device compatibility and downloads.
The KE-USB36 attaches to your computer's
USB port. Use a standard A-B Male/Male
type USB connecting cable from the KE-
USB36 to the USB port on the computer.
The KE-USB36 may be connected directly
to the USB port on the PC or through a
compliant USB Hub.
Connect the type "B" end of the USB cable
into the KE-USB36 and the type "A" end
into the PC or HUB USB connector.
load the
Figure 3 - Connection of the USB cable to
KE-USB36
5