Table of Contents
Advertisement
Use this same technique to define each of the inputs that you wish
to use in your configuration. In addition to specifying an input
to emulate a keystroke, inputs may also be defined as either the
Left, Middle, or Right mouse button. Select Left, Middle, or Right
mouse buttons when the keyboard selection diagram is shown to
define an input as a mouse button.
Note that a Trackball need not be attached to emulate the mouse
buttons. The KE-USB36FS runs as both the mouse and the
keyboard at all times. If no Trackball device is connected to the
unit, no cursor movement will be initiated from the KE-USB36FS,
but the ability to emulate Left, Middle, or Right mouse buttons
remains.
Any input defined as a keystroke may also be combined with
a Ctrl, Alt, or Shift function, or any combination of those three
modifiers. To initiate a Shift with the specified keystroke, simply
check the box marked "Shift" on the same line as that input. For
example, if you wish to emulate a Shift+F1 key, define the input
as an "F1" keystroke, then check the Shift box on that line. An
input with additional Ctrl,Alt, or Shift functions automatically has
repeat disabled.
12
Advertisement
Table of Contents
