How To Reset To Factory Default Settings - Axis T90D20 IR-LED User Manual

AXIS T90D Illuminator Series

How to reset to factory default settings

How to reset to factory default settings
You can choose to make a full reset or a settings reset. The full reset restores factory default settings and removes the PIN if one
has been set. The settings reset restores factory default settings but keeps the PIN, and returns the illuminator to the mode it was
in before the reset.
Settings reset with remote control
1. When the product is in programming mode, press and hold the reset button for 4 seconds.
Settings reset with control buttons
1. Press and hold the left control button for 4 seconds until the left hand side LED turns flashing red.
2. Press and hold the right control button for 4 seconds. The right hand side LED stays solid red during that time. After 4
seconds, both LEDs flash amber.
Full reset with control buttons
1. Press and hold both control buttons while disconnecting and reconnecting power.
14