AXIS T90D Illuminator Series
Setup
1
20% of maximum
2
40% of maximum
3
60% of maximum
4
80% of maximum
5
100% of maximum
With the control buttons
1. Press the left control button once so that the left hand side LED turns solid red.
2. Press the right control button repeatedly. The right hand side LED indicates the light intensity level:
-
one green flash: 20% of maximum.
-
two green flashes: 40% of maximum.
-
three green flashes: 60% of maximum.
-
four green flashes: 80% of maximum.
-
five green flashes: 100% of maximum.
How to adjust the photocell sensitivity
The photocell sensitivity level decides at which lux level thresholds the illuminator turns on and off. There are three predefined levels.
Note
If you disable the photocell, the illuminator turns on and off from a telemetry input regardless of ambient lighting conditions.
With the remote control
Use the photocell sensitivity buttons to select the required sensitivity level.
12
Need help?
Do you have a question about the AXIS T90D20 IR-LED and is the answer not in the manual?