Table of Contents
Advertisement
56
Upgrading the CPU
This section includes instructions for removing and installing a CPU.
To remove a CPU with heatsink
Before installing a new CPU in a socket, remove first any previously
installed CPU from that socket.
Important: Before removing a CPU from the mainboard, make
sure to create a backup file of all important data.
1
Observe the ESD precautions and pre-installation procedures
described on page 37.
2
Locate the CPU socket on the mainboard.
3
To detach the CPU from its socket, follow the steps below:
(1) Depress then lift up each of the locking levers to a 90° angle.
(2) Remove the heatsink.
(3) Lift the CPU locking lever until it is fully extended.
(4) Gently unseat and pull the CPU from the socket.
3 Upgrading the system
Advertisement
Table of Contents
