Table of Contents
Advertisement
4.6.2
Removing a DIMM
1. Press the holding clips on both sides of the socket outward to release the
DIMM.
2. Gently pull the DIMM out of the socket.
Figure 4-14 Removing a DIMM
4.6.3
Reconfiguring the System
The system automatically detects the amount of memory installed. Run Setup to
view the new value for total system memory and make a note of it.
4.7
Upgrading the CPU
The board supports a Pentium II processor or a Celeron processor.
processors come in a new enclosed packaging technology called S.E.C.
(Single-Edge Contact) cartridge. The only difference between the two is that the
Chapter 4 - Installing Optional Components 4-15
Both
Advertisement
Table of Contents
