Table of Contents
Advertisement
To install the SCSI cable cage
1
Turn off the system and all the peripherals connected to it.
2
Unplug all cables from the power outlets.
3
Place the system unit on a flat, stable surface.
4
Remove the front bezel, inner front panel, side panel, and air
baffle.
5
Insert the HDD cable cage into the housing (1), then tighten the
four thumbscrews to secure it to the chassis (2).
6
Connect the SCSI cable and the SCSI HDD power cable to the hard
disk drive.
7
Reinstall the air baffle and the chassis panels.
51
Advertisement
Table of Contents
