Operating Instructions - SynerTech 1 family Installation And Operation Manual

For door station
Step 1: Locate and mark screwing positions on the wall.
Step 2: Fix the flush in bracket securely onto the wall. Ensure it is leveled against the wall.
Step 3: Separate the audio box from the aluminum panel.
Step 4: Screwing out the screws between the audio box and flush-in bracket. (Fig. 8)
Step 6: Screw back the audio board and the flush-in bracket before put back the aluminum panel.
Step 7: Name plate: Remove the plastic cap by using flat type screwdriver. Print the name on the
PVC white sheet, and covered by the plastic cap again.
Step 8: Ensure the connecting cable runs tidily from the door lock and the door station.

6.Operating Instructions

Identifying
Step 1: When a visitor presses the call button on the door station, an electronic door chime will
spell out from the handset. The 8 chorus sound of volume could be adjusted by the
knob.
Assuming that the visitor is talking near the microphone ( around 20cm ), you can hear the
visitor's voice via the handset.
After identifying the visitor you can:
Step 2: Talk to the visitor by lifting the handset just as you do with regular phone.
Step 3:
Press "TALK" button to start the conversation. The background light of the icons will be turned
Fig. 8
P. 11 of 14