Led And Beeper Indications - Datalogic QuickScan QM2400 Quick Reference Manual

LED and Beeper Indications

The reader's beeper sounds and its LED illuminates to indi-
cate various functions or errors on the reader. An optional
"Green Spot" also performs useful functions. The following
tables list these indications. One exception to the behaviors
listed in the tables is that the reader's functions are program-
mable, and so may or may not be turned on. For example, cer-
tain indications such as the power-up beep can be disabled
using programming bar code labels.
Indication
Power-up
Beep
Good Read
Beep
ROM Failure
Limited
Scanning
Label Read
Reader
Active Mode
Reader
Disabled
Quick Reference Guide
Description
The reader is in
the process of
powering-up.
A label has been
successfully
scanned by the
reader.
There is an error
in the reader' s
software/pro-
gramming
Indicates that a
host connection
is not estab-
lished when the
IBM or USB inter-
face is enabled.
The reader is
active and ready
to scan.
The reader has
been disabled by
the host.
LED and Beeper Indications
LED
N/A
LED behavior for
this indication is
configurable via
the feature
"Good Read:
When to Indi-
cate"
(see the PRG for
information.)
Flashes
N/A
The LED is lit
a
steadily
The LED blinks
continuously
Beeper
Reader beeps
four times at
highest fre-
quency and vol-
ume upon
power-up.
The reader will
beep once at
current fre-
quency, volume,
mono/bi-tonal
setting and
duration upon a
successful label
scan.
Reader sounds
one error beep
at highest vol-
ume.
Reader ' c hirps'
six times at the
highest fre-
quency and cur-
rent volume.
N/A
N/A
33