Datalogic QuickScan QM2400 Quick Reference Manual page 42

LED and Beeper Indications
Indication
a
Green Spot
flashes
momentar-
ily
a Except when in sleep mode or when a Good Read LED Duration other than
00 is selected
Programming Mode
the reader is in Programming Mode.
Indication
Label Program-
ming Mode Entry
Label Program-
ming Mode Rejec-
tion of Label
Label Program-
ming Mode
Acceptance of
Partial Label
Label Program-
ming Mode
Acceptance of
Programming
Label Program-
ming Mode Can-
cel Item Entry
34
Description
Upon successful
read of a label,
the software
shall turn the
green spot on for
the time specified
by the configured
value.
- The following indications ONLY occur when
Description
A valid program-
ming label has
been scanned.
A label has been
rejected.
In cases where
multiple labels
must be scanned
to program one
feature, this indi-
cation acknowl-
edges each
portion as it is
successfully
scanned.
Configuration
option(s) have
been successfully
programmed via
labels and the
reader has exited
Programming
Mode.
Cancel label has
been scanned.
LED
N/A
LED
LED blinks Reader sounds
continu- four low fre-
ously quency beeps.
Reader sounds
three times at
lowest fre-
N/A
quency and
current vol-
ume.
Reader sounds
one short beep
at highest fre-
N/A
quency and
current vol-
ume.
Reader sounds
one high fre-
quency beep
N/A and 4 low fre-
quency beeps
followed by
reset beeps.
Reader sounds
two times at
N/A low frequency
and current
volume.
QuickScan™ QM2400
Beeper
N/A
Beeper