Using The Delete Button In The View / Modify Regions Dialog Box; Re-Calculate All Autogates; Create Prism Divider; Dual Prism Divider - Beckman Coulter Navios Instructions For Use Manual

Using the Delete Button in the View / Modify Regions Dialog Box

1
2
the Region to delete and
(
Use
Ctrl+
(
Use
Ctrl+A
3
When you exit the
If a deleted Region was also specified in any statistics or Gates, then Navios software updates to
reflect these changes.

Re-Calculate All AutoGates

Use this function to re-calculate multiple autogates in a protocol, rather than re-calculating them
individually.

Create Prism Divider

Dual Prism Divider

The Analysis > Create Prism Divider > Dual Prism Divider
two Prism dividers in a "quadrant fashion" on a dual parameter plot. Any displayed Prism Plot is
automatically updated with the new Prism statistics. If the number of Prism dividers is changed
during the divider creation, the corresponding Prism plot also reflects this by changing its format
according to the number of active Prism dividers.
NOTE
Navios Cytometer software only allows one Prism divider per parameter and the dividers are GLOBAL
across the application. As a consequence, modifying the Prism divider of any parameter on any plot
automatically updates the divider of that parameter if it is displayed on any other plot. This includes both
dual and single parameter plots.
773232AH
.
)
to select multiple regions to delete.
)
to select all of the regions.
( )
or press to delete the Regions.
Enter
( )
or press to exit the dialog box without deleting any selected Regions.
Esc
View / Modify Regions
.
dialog box, Navios software updates all the Windows.
menu option allows you simultaneously set
Using Navios Software 10
Analysis Menu
10-135