Create A Histogram Freeze Frame; Delete A Histogram Freeze Frame Overlay - Beckman Coulter Navios Instructions For Use Manual

Create a Histogram Freeze Frame

In order for Freeze Frame to work in Acquisition, ensure that pass protocol is set up in the
Acquisition Manager.
1
Read in a file or acquire data to be assigned as an overlay (for example: a negative control).
2
Highlight the chosen single parameter Histogram to be used as an overlay plot (click on the title
bar).
3
Click the right mouse button on the plot and
See also Histogram
4
Check a
overlay and the bottom button creates a dashed Histogram.
5
The current Histogram is assigned to whichever overlay button is selected and its name appears
in the edit box adjacent to the button, this legend may be modified if desired.
6
7
Now you can open another file or acquire a positive sample. The new data is displayed as the
base histogram and the previous sample is seen as an overlay.

Delete a Histogram Freeze Frame Overlay

1
Highlight the plot containing the unwanted overlay (click on the title bar).
773232AH
Formatting.
Freeze Frame
box to assign the current Histogram. The top button creates a dotted
( )
or press
Enter
( )
or press to exit the dialog box without saving the changes.
Esc
to accept any changes.
Using Navios Software
Plots Menu
, then the Histogram tab.
10
10-97