d. Rotate the SMP Expansion Module locking levers forward until the SMP
Expansion Module is securely fastened in place. Refer to the following illustra-
tion.
Note: The illustrations in this document might differ slightly from your hard-
ware.
Locking
levers
3. If you have other options to install or remove, do so now.
4. Close the cover on the server; then, reinstall the server in the rack and connect all
external cables. For details, see "Closing the cover" on page 49.
5. Turn on the server.
Note: When you install or remove SMP Expansion Modules, the server configu-
ration information changes. Therefore, you must change and save the new
configuration information by using the Configuration/Setup Utility program.
Refer to the User's Guide on the Documentation CD.
Center plane
Handle
Cover
Chapter 2. Installing options
43