SOMFY Roll Up 28 RTS Installation Manual
  1. Manuals
  2. Brands
  3. SOMFY Manuals
  4. Indoor Furnishing
  5. Roll Up 28 RTS
  6. Installation manual
SOMFY Roll Up 28 RTS Installation Manual

SOMFY Roll Up 28 RTS Installation Manual

Roll up wirefree battery motor
Hide thumbs Also See for Roll Up 28 RTS:
Table of Contents

Advertisement

Quick Links

See also: Instruction Manual , Installation Manual
Wirefree Battery Motor
Installation guide
Copyright © 2013 Somfy SAS. All rights reserved - V1 - 02/2013
1

Advertisement

Table of Contents
loading

Related Manuals for SOMFY Roll Up 28 RTS

Summary of Contents for SOMFY Roll Up 28 RTS

  • Page 1 Wirefree Battery Motor Installation guide Copyright © 2013 Somfy SAS. All rights reserved - V1 - 02/2013...
  • Page 2 Somfy hereby declares that this product conforms to the essential requirements and other relevant provisions of Directive 1999/5/CE. A Declaration of Conformity is available at www.somfy.com/ce. Usable in EU, CH and NO. Images are not contractually binding. Copyright © 2013 Somfy SAS. All rights reserved - V1 - 02/2013...

  • Page 3: Table Of Contents

    The Roll Up 28 RTS can motorize roller blinds, silhouette blinds and roman shades. The Roll Up 28 RTS is a battery operated motor, powered with lithium primary batteries or NiMH batteries with solar pack. The motor can also be powered by a power supply.

  • Page 4: Safety

    2. SAFETY 2.1. Safety and responsibility This Somfy product must be installed by a professional motorisation and home automation installer, for whom these instructions are intended. Before installation, check that this product is compatible with the associated equip- ment and accessories.

  • Page 5: Wiring

    4.1. Programming the RTS transmitter Press the UP and DOWN buttons simultaneously on the RTS transmitter: the shade jogs and the control point is preprogrammed in the motor Copyright © 2013 Somfy SAS. All rights reserved - V1 - 02/2013...

  • Page 6: Checking The Rotation Direction

    The Down limit is memorized. The shade moves up and will stop at its upper limit. the MY button until the shade jogs.The end limits are recorded. Copyright © 2013 Somfy SAS. All rights reserved - V1 - 02/2013...

  • Page 7: Recording The Rts Transmitter

    5. OPERATION The Roll Up 28 RTS is designed to work in 2 modes: Tilting mode or Roller mode. This feature allows the Roll Up 28 RTS to be set according to the type of blind you are working with.
  • Page 8 1) To move the shade from a limit to the button. 2) To stop the shade, press the MY button. 3) If a MY position is recorded,To move the MY button. Copyright © 2013 Somfy SAS. All rights reserved - V1 - 02/2013...

  • Page 9: Additional Setting

    3) Press and hold the UP or DOWN button to move the shade to the new desired position. the MY button until the shade jogs. Copyright © 2013 Somfy SAS. All rights reserved - V1 - 02/2013...

  • Page 10: Modifying The Motor Rotation Direction

    3) Press the MY button until the shade jogs to reverse the rotation direction. 4) Press the UP button to check the new rotation direction. The motor rotation direction is reversed. Copyright © 2013 Somfy SAS. All rights reserved - V1 - 02/2013...

  • Page 11: Adding/Deleting Rts Transmitter

    6.6. Erasing the memory of the motor To reset the motor, press and hold the PROG button on the motor head until the shade jogs 3 times. All the settings are erased. Copyright © 2013 Somfy SAS. All rights reserved - V1 - 02/2013...

  • Page 12: Technical Data

    Maximum distance between two end-limit 180 turns Maximum running time 6 min Operating temperature 0°C to + 60°C Protection rating IP 20 (For indoor use only) Maximum number of associated control Copyright © 2013 Somfy SAS. All rights reserved - V1 - 02/2013...

Table of Contents