Switching Off After Activating; Software Version - Miele PG 8581 Operating Instructions Manual

Switching off
after activating
Setting the standby
duration
Open the menu as follows:

 button
Additional settings

 Switch off after
Switch off after
Yes
No
Yes
–
The Auto-Off function is activated. A duration must be set after
which automatic switch-off should occur.
No
–
The Auto-Off function is deactivated.
Select an option using the  and  arrow buttons.

Press OK to save the setting.

Yes
If the option has been selected, the standby duration after which
automatic switch-off should occur must be set next.
The standby duration can be adjusted in 5 minute increments. The
possible range is shown in the bottom line of the display.
Use the  (higher) and  (lower) arrow buttons to set the standby

duration.
Press OK to save the setting.


Software version

You can use this menu to view the software versions of individual
elements, e.g. when contacting Miele Service.
For more information, see "Service."
Switch off after
60 Min
(5 - 120 Min )
Additional settings
83