Additional settings
Configuring the
interface
Ethernet
78
The interface must be configured only by a qualified and
competent person.
Open the menu as follows:
button
Additional settings
Interface
Interface
Ethernet
–
Configuration of an Ethernet interface.
RS232
–
Configuration of a serial RS232 interface.
Select the type of interface and press OK to confirm your selection.
The parameters for the interface must be configured next.
Module status
–
Connection status displayed (
Address status
–
List of interface parameters, e.g. IP address, Subnet mask etc.
DHCP
–
The Ethernet interface can either be implemented via a Dynamic
Host Configuration Protocol (DHCP) or by setting the following
parameters:
–
IP address
–
Subnet mask
Standard gateway
–
DNS Server - automatic
–
DNS Server 1
–
DNS Server 2
–
Port type
–
Port
–
Ethernet
RS232
Active
Inactive
/
).