Important Safety Instructions - Miele PG 8581 Operating Instructions Manual

IMPORTANT SAFETY INSTRUCTIONS

8
This machine complies with all statutory safety requirements.
However, inappropriate use can lead to personal injury and material
damage.
Read these instructions carefully before using the machine for the
first time to avoid the risk of accidents and damage to the machine.
Keep these instructions in a safe place where they are accessible
to users at all times.
Proper use

This washer-disinfector is designed for use with the applications
described in these operating instructions only. Alterations or
conversions to the machine, or using it for purposes other than those
for which it was designed, are not permitted and could be dangerous.
This washer-disinfector must only be used for cleaning and
disinfecting of instruments or medical devices if the instrument
manufacturer has stated that they are suitable for machine
reprocessing. The manufacturer's cleaning and maintenance
instructions must also be observed.
Miele cannot be held liable for damage caused by improper or
incorrect use or operation of the machine.

This machine is intended for indoor use in a stationary location
only.
Risk of injury
Please pay attention to the following notes to avoid injury.

This washer-disinfector must be commissioned, serviced and
repaired by a Miele authorized and trained service technician only.
Unauthorized repairs can pose considerable risks to the user.

The installation and the work flow of the instruments must be in
such a way, that a recontamination of intermediate-level thermally
disinfected instruments and a mix up of clean and dirty instruments is
not possible.
AAMI ST79 shows an example of proper layout and work-flow.

Do not install the machine in an area where there is any risk of
explosion or of freezing conditions.

In order to reduce the risk of water damage, the area around the
machine should be limited to furniture and fittings that are designed
for use in commercial environments.

Some metal parts pose a risk of injury/being cut. Wear cut-
resistant protective gloves when transporting and setting up the
machine.

If the machine is built under a worktop, it must only be installed
under a continuous worktop run which is firmly secured to adjacent
units to improve stability.