Analyzer Operation; Overview Of The Controls; Overview Of The Display Indicators; Functions Of Display Controls - OHAUS MB25 Service Manual

CHAPTER 1 GETTING STARTED
1.5

ANALYZER OPERATION

This section contains information on the basic operation of the scale.

1.5.1 Overview of the Controls

Button: Name:
Start/Stop
Tare
Temp
Time
There are also several modes of operation which affect how each button operates. Please refer
to the following section.

1.5.2 Overview of the Display Indicators

Stable
indicator
Ohaus Corporation www.ohaus.com
Figure 1-1. MB23 and MB25 Function Labels.
TABLE 1-2. FUNCTIONS OF DISPLAY CONTROLS
Functions:
On (short press)/Off (long press)
Start/Stop (short press)
Back (short press)
Tare (short press)
Enter/Accept value (short press)
Temperature Setting
(short press)
Time Setting (short press)
Figure 1-2. MB23 & MB25 Display Indicators.
Button: Name:
Set 
Set 
Print/Cal
%g
% Solid
1-4 MB23 and MB25 Service Manual
25
Functions:
Increase value
(short or long press)
Decrease value
(short or long press)
Print (short press)
Calibrate (long press)
Result Unit (short press)
Temperature
=% Moisture
setting* or
current
chamber
temperature*
(Celsius)
*Depends on Mode
Timing Setting