Maintenance Checklist - Ventrac 2100C Operator's Manual

Maintenance Checklist

Maintenance
Checklist
Front Hitch
Lift Cylinder
Operator Platform Pivot
Spherical Rod Ends
Check Engine Oil Level
!
Change Engine Oil & Filter
Clean/Replace Spark Plugs
Clean Foam Air Filter (every 25 hours)
Replace Paper Air Filter
Service Engine: Remove air cleaner cover.
Inspect and Clean
Clean Engine Compartment, Engine, and
Engine Rotating Screen
Replace Fuel Filter
Drain Water & Sediment from Fuel Tank
Check Hydraulic Oil Level
%
Change Hydraulic Filters
%
Change Hydraulic Oil
Parking Brake Inspection & Adjustment
Clean Battery Terminals & Compartment
Inspect Operator Interlock System
Inspect Safety Decals
Inspect for Loose, Missing, or Worn
Components
Inspect Battery, Electrical Connections,
and Lights
Inspect Belts, Fuel Lines, and
Hydraulic Lines
Check Tire Pressure.
Check Wheel Lug Nuts.
Torque to 85 ft-lbs (115 Nm)
Check Front Hitch Pivot Bolts.
Torque to 150 ft-lbs (203 Nm)
* Ventrac recommends servicing more frequently at 1/2 the standard service interval.
** Operation in severe conditions may require more frequent service intervals.
! Consult Engine Owner's Manual for engine oil information and complete servicing information
# Silicon Based Spray Lubricant
% Hydraulic oil & filters: initial change @ 500 hours. Then change oil and filters every 1000 hours. .
Grease & Lubrication: See Lubrication Section
2 1
2 1
2 #
6 #
SERVICE
!
Engine
Consult Engine Owner's Manual*
Hydraulic System
Parking Brake
Electrical
Inspection
Service - 44