Manitou Circus Expert Service Manual page 25

COMPRESSION DAMPER INSTALL
Insert the ABS+ compression damper
4
into the damper leg. Ensure the damper
is set in the unlocked position when
installing.
Install the ABS+ damper using a 24mm
5
socket and torque wrench, tighten the
damper to 60–80 in lbs [6.8–9.0 NM].
Install springs and ball bearings into
6
ABS+ top cap. A small dab of grease on
top of the spring can help hold the ball
bearings in place.
CIRCUS EXPERT SERVICE MANUAL
25