Table of Contents
Advertisement
3.1 Before Installation
3.1 Before Installation
Please read the following notes concerning installation and connection before installing the Trunk Adaptor. Be
sure to comply with all applicable laws, regulations, and guidelines.
Notice
Panasonic assumes no responsibility for injuries or property damage resulting from failures arising out of
improper installation or operation inconsistent with this documentation.
Installation Precautions
The Trunk Adaptor can be mounted on a wall or placed on a desktop, and should be installed in a location
where it is accessible for inspections and maintenance.
To prevent malfunction, noise, or discolouration, follow the instructions below:
WARNING
Do not install the system in the following locations:
•
Areas where shocks or vibrations are frequent or strong. Such activity may lead to the product
falling over and causing injury, or may impair the product's performance.
•
Areas with high amounts of dust. High amounts of dust can lead to fire or electric shock, and
impair the performance of the product.
CAUTION
Do not install the system in the following locations:
•
In direct sunlight and hot, cold, or humid places. (Temperature range: 0 °C to 40 °C)
•
Areas where sulphuric gases may be present, such as near thermal springs.
•
Near devices that generate high frequencies, such as sewing machines or electric welders.
•
Locations where other objects will obstruct the area around the Trunk Adaptor. Be especially careful
to leave at least 5 cm to the sides of the Trunk Adaptor for ventilation.
Notice
Do not install the system in the following locations:
•
On or near computers, or other office equipment, as well as microwave ovens or air conditioners. (It is
preferable not to install the system in the same room as the above equipment.)
•
Within 1.8 m of radios and televisions. (Both the Trunk Adaptor and the PBX should be at least 1.8 m
away from such devices.)
Wiring Precautions
Be sure to follow these instructions when wiring the unit:
CAUTION
•
Avoid using the same AC outlet for computers and other office equipment, as noise generated by such
equipment may hamper system performance or interrupt the system.
•
Unplug the system from its power source when wiring, and plug the system back in only after all wiring
is completed.
24
Installation Manual
Hide quick links:
Advertisement
Table of Contents
