Table of Contents
Advertisement
2.2
Picking up liquids
CAUTION
Picking up liquids.
Do not pick up flammable liquids
•
Before liquids are picked up, always re-
move the filter bag/wastebag and check
that the float or the water level limit works
properly.
•
The use of a separate filter element or
filter screen is recommended.
•
If foam appears, stop work immediately
and emty the tank.
2.3
Hazardous materials
WARNING
Hazardous materials.
Vacuuming up hazardous materials can lead
to serious or even fatal injuries
•
The following materials must not be
picked up by the vacuum cleaner:
•
hazardous dust
•
hot materials (burning cigarettes, hot ash,
etc.)
•
flammable, explosive, aggressive liquids
(e.g. petrol, solvents, acids, alkalis, etc.)
•
flammable, explosive dust (e.g. magne-
sium or aluminium dust, etc.)
2.4
Spare parts and accessories
CAUTION
Spare parts and accessories.
The use of non-genuine spare parts and ac-
cessories can impair the safety of the appli-
ance.
•
Only use spare parts and accessories
from Nilfisk.
•
Use only the brushes supplied with the
vacuum cleaner or specified in the operat-
ing manual.
2.5
Emptying dirt tank
CAUTION
Picking up environmentally hazardous materi-
als.
Materials picked up can present a hazard to
the environment.
•
Dispose of the dirt in accordance with le-
gal regulations.
2.6
In explosive or inflammable atmosphere
CAUTION
This machine is not suitable for use in explo-
sive or inflammable atmospheres or where
such atmospheres are likely to be produced
by the presence of volatile liquid or inflamma-
ble gas or vapour.
*)
Optional accessories / Option depending on model
Original instruction
2.7
Blower function.
CAUTION
The vacuum cleaner has a blower function.
Do not blow the outgoing air randomly in en-
closed areas. Use the blower function only
with a clean hose. Dusts can be hazardous to
one's health.
3
Control / Operation
3.1
Starting and operating of the machine
Check that the electrical switch is switched off (in
position 0). Check that suitable filters are installed
in the machine.Then connect the suction hose into
the suction inlet at the machine by pushing the hose
forward until it fits firmly in place at the inlet. Then
connect the two tubes with the hose handle, twist
the tubes in order to ensure that they are properly
fitted. Attach suitable nozzle to the tube. Choose
nozzle depending on what type of material that is to
be picked-up. Connect the plug into a proper electri-
cal outlet. Put the electrical switch into position 1 in
order to start the motor.
Press I : Activate the machine
Press 0 : Stop the machine
Press I : Activate the machine
Press 0 : Stop the machine
Press
: Activate Auto-On/Off operation
Press I : Activate the machine - turn clock
wise for speed control
Press 0 : Stop the machine
Press
: Activate Auto-On/Off operation
- turn counter clockwise for speed control
3.2
Auto-On/Off-Operation for power tools*
A socket outlet with earthing contact is integrated in
the vacuum cleaner. An external power tool can be
connected there.
The vacuum cleaner can be switched on and off by
the power tool connected. Dirt is picked up from the
source of dust immediately.
To comply with regulations, only approved dust pro-
ducing tools should be connected.
The maximum power consumption of the connected
electrical appliance is stated in section "Specifica-
tions".
Before switching the switch to position
that the tool connected to the appliance socket is
switched off.
3.3
Before wet pick-up
CAUTION
The machine is equipped with a float system
that shuts off the airflow through the machine
ensure
5
Hide quick links:
Advertisement
Table of Contents
