Motorola MDC50 User Manual page 15

G-Sensor
Park Mode
Format
Default
Setting
Version
15
G Sensor detects forces which will
automatically protect the current
recording in the event of a collision.
You can change the sensitivity of the
sensor. It is set to Low by default, but
can be set to Off/High/Medium/Low.
If you turn the sensor off, your
dashboard camera will not be able to
permanently save any footage.
Enable or disable parking mode.
Use this option to format your SD
Card.
IMPORTANT! Formatting a SD card
will erase all its memory contents.
Reset all your device settings to
factory default.
Current firmware version.
Settings