Headlightadjustment - Gilera Nexus 250 i.e. Manual

03_31

Headlightadjustment (03_32, 03_33)

Proceed as follows:
1. Place the vehicle in riding condition and with the tyres correctly inflated on a flat
piece of ground at a distance of 10 m from a white screen situated in a shaded area,
making sure that the scooter is perpendicular to the screen;
2. Turn on the headlight and check that the edge of the beam projected on the screen
is not more than 9/10 of the height of the centre of the headlight from the ground, and
not less than 7/10;
3. Otherwise, adjust the right headlight with the screw «A» that can be reached after
removing the front shield union in the «Front headlight assembly» section.
N.B.
03_32
THE ABOVE PROCEDURE COMPLIES WITH THE EUROPEAN STANDARDS RE-
GARDING MAXIMUM AND MINIMUM HEIGHT OF LIGHT BEAMS. REFER TO THE
STATUTORY REGULATIONS IN FORCE IN EVERY COUNTRY WHERE THE VE-
HICLE IS USED.
69