Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for TrueLife NannyCam H32
Summary of Contents for TrueLife NannyCam H32
- Page 1 NannyCam H32 InstructIons For use...
- Page 2 Package contents: – Parent Unit (with display) + power adapter – Baby Unit (camera) + power adapter – Instructions for Use BaBy Unit overview: 1. Light Sensor 2. Camera Lens 3. Blue LED Power Indicator 4. Microphone 5. Infrared LED for night vision 6.
- Page 3 getting started: A) Baby Unit (camera) 1. Connect the small plug of the power adapter to the baby unit and the other end to the mains socket. 2. Next slide the power switch to the “ON” position. 3. The blue LED indicates the camera is functioning correctly. Note: Baby Unit requires a constant connection to the mains.
- Page 4 setUP and FUnctions: – When the parent and baby units are switched on and within range, a live image from the camera will appear within a few seconds. – Place the camera in a suitable location and adjust the camera lens until you are satisfied with the image on the parent unit.
- Page 5 MenU: – Press the “OK / Menu” key on the parent unit to access the menu. Navigate using the “up” and “down” arrow keys. The “Back” key takes you back one page or to the monitoring screen. – The menu contains 6 icons: 1.
- Page 6 • 4 – VOX – VOX mode settings Here you can activate or deactivate VOX mode and adjust its sensitivity. When VOX mode is activated, after a short period of silence the display turns off and audio transmission is stopped to save battery. This setting is perfect for a night of babysitting. Crying or any other noise immediately activates the camera and monitoring begins.
Need help?
Do you have a question about the NannyCam H32 and is the answer not in the manual?
Questions and answers