Upgrading the eGO-note
PC Card
By installing PC Cards, you can add functions to the eGO-note similar to
notebook computers.
You can install Type I or II cards in the slots to the eGO-note. And you
can install PC Cards while the eGO-note is on.
To insert a PC Card into a slot:
1. Insert the PC card into an appropriate slot according to your PC
card type.
2. Press the PC card firmly into the connector until the eject button
pops out. Then, pull the eject button out slightly and fold it to
the right. (Figure 19).
The eject button for the card slot operates in two steps.
To remove a PC Card:
1. Raise the PC card eject button for the PC card you want to
remove. Then, press the PC card eject button until the PC card
pops out.
Figure 19. Inserting PC card
Upgrading the eGO-note 25
Need help?
Do you have a question about the eGO-note and is the answer not in the manual?