You may wish to adjust the LCD (liquid-crystal display) when
you begin using your eGO-note. You can adjust the contrast on
a DSTN (double layer super twist nematic) LCD.
To adjust the LCD:
•
•
4. Follow the instructions on the screen. Press <Enter>.
5. Set your home location and click Next.
Place your finger on the touchpad and slide your finger in the
direction you want the cursor to move. Select the location arrow
to see a list of cities and choose your location.
6. Set the time and date. Click Next.
Click the arrow on the calendar until it displays the correct
month and click the date.
Change the time on the right side.
7. Fill your personal information in Owner Properties. Then a
message tells you, "Setup is now complete." and click Done.
Now your eGO-note is set. If you want to make changes, click Start >
Setting > Control Panel and use World Clock, Owner icons.
Tips for Using the eGO-note
The following information helps you avoid potential problems as you use
the eGO-note:
•
Follow all the instructions and cautions in the user
documentation.
•
The LCD has a polarized surface and can be damaged easily.
To prevent damage, avoid touching the screen.
10 User's Manual
Press <Atl+ > > to increase the display contrast.
Press <Atl+ < > to decrease the display contrast.
Do not try to disassemble the eGO-note. Opening the
system chassis voids your warranty. Only an authorized
manufacturer's service center can replace or add any
parts inside the chassis.
Need help?
Do you have a question about the eGO-note and is the answer not in the manual?
Questions and answers