Installing A Memory Module - Samsung eGO-note User Manual

•
Before you remove the memory module compartment door,
turn off the eGO-note, unplug the power cord, and remove the
battery. Also, disconnect any peripheral devices.
•
Before handling a memory module, discharge any static
electricity by touching a grounded surface or using a grounding
wrist strap.
•
Do not insert objects with conductive material, such as metal
screwdrivers or graphite pencils, into a memory-module
compartment.
•
Be careful in handling the metal plate of the memory door.

Installing a Memory Module

To install a memory module:
1. Turn the eGO-note over so that the bottom faces up.
2. Using a screwdriver, remove the screw and the memory-module
compartment door. (Figure 23).
Figure 23. Removing the Memory Module compartment door
3. Align the connector on the memory module with the connector
of the slot.
28 User's Manual
Handle a memory module carefully. Hold them only by the
edges.