Using Dynamic Stability Control - Mazda BT-50 2017 Owner's Manual

USING DYNAMIC
STABILITY CONTROL
NOTE
The system will be switched on
l
automatically every time you switch
the ignition on.
When the system is deactivated with
l
the transfer switch in 2H position,
the DSC OFF indicator will flash
twice to indicate that the system is
completely turned off and remains
illuminated. Press the switch again to
enable the system. For item location:
See At a Glance (page 3).
DSC is switched off when the
l
transfer switch is in 4L position or
the Electronic Locking Differential is
operating.
q2-wheel drive vehicles
Press and hold the switch for one second
to deactivate Engine Traction Control,
Trailer Sway Assist and Brake Traction
Control. Hill Launch Assist remains
active.
q4-wheel drive vehicles
NOTE
All the stability control (DSC) functions
are reactivated when 2H position is
selected.
Dynamic Stability Control
Transfer shift switch in 4H position:
Press and hold the switch for one
l
second to deactivate Engine Traction
Control and Trailer Sway Assist. Hill
Descent Control, Hill Launch Assist
and Brake Traction Control remain
active.
Transfer shift switch in 4H or 4L position:
Press and hold the switch for five
l
seconds to deactivate Engine Traction
Control, Trailer Sway Assist and Brake
Traction Control. Hill Descent Control
and Hill Launch Assist remain active.
Transfer shift switch in 2H position:
Press and hold the switch for one
l
second to deactivate Engine Traction
Control, Brake Traction Control and
Dynamic Stability Control including
Trailer Sway Assist. Hill Descent
Control and Hill Launch Assist remain
active.
135