Isofix Anchor Points - Mazda BT-50 2017 Owner's Manual

Child Safety

ISOFIX ANCHOR POINTS

WARNING
Use an anti-rotation device when
using the ISOFIX system. We
recommend that you use a top tether
or a support leg.
NOTE
When you are purchasing an ISOFIX
restraint, make sure that you know the
correct mass group and ISOFIX size
class for the intended seating locations.
See Child Seat Positioning (page 14).
Your vehicle is fitted with ISOFIX anchor
points that accommodate universally
approved ISOFIX child restraints.
The ISOFIX system comprises two rigid
attachment arms on the child restraint that
attach to anchor points on the 2nd row
seats, where the cushion and backrest
meet. Tether anchor points are fitted to the
back panel trim for child restraints with a
top tether.
qAttaching a child restraint with a
top tether
WARNING
Do not attach a tether strap to
anything other than the correct tether
anchor point.
í
16
Some models.
Double cab
í
1. Remove the head restraint. However,
when installing a booster cushion,
always install the vehicle head restraint
to the seat where the booster cushion is
installed. See Head Restraints (page
103).
2. Place the child seat on the back seat
cushion and fold the relevant seatback
forward. See Rear Seats (page 104).