Keys And Remote Controls; General Information On Radio Frequencies; Programming The Remote Control - Mazda BT-50 2017 Owner's Manual

GENERAL INFORMATION
ON RADIO FREQUENCIES
CAUTION
The radio frequency used by your
l
remote control can also be used by
other short distance radio
transmissions (e.g. amateur radios,
medical equipment, wireless
headphones, remote controls and
alarm systems). If the frequencies are
jammed, you will not be able to use
your remote control. You can lock
and unlock the doors with the key.
Check your vehicle is locked before
l
leaving it unattended. This will
safeguard against any potential
malicious frequency blocking.
NOTE
You could unlock the doors if you press
the buttons on the remote control
unintentionally.
The operating range between your remote
control and your vehicle varies depending
on the environment.

Keys and Remote Controls

PROGRAMMING THE
REMOTE CONTROL
NOTE
Additional remote controls can be
programmed only if the vehicle is
supplied with at least one remote
control.
A maximum of eight remote controls
(including the one supplied with your
vehicle) can be programmed. The remote
controls must remain inside the vehicle
during the programming procedure.
Fasten the front seat belts and close all
doors to ensure that conflicting chimes do
not sound during programming.
qProgramming a new remote control
1. To programmeme new remote controls
turn the ignition key to position II four
times within six seconds.
2. Turn the ignition to position 0. A tone
sounds to indicate that it is now
possible to programmeme the remote
controls for ten seconds.
3. Press any button on a new remote
control. A tone will sound as
confirmation.
4. Repeat this last step for all your remote
controls, including your original. Do
not remove the key from the ignition
when pressing the button on this
remote control.
35