Lenovo Mini Projector Quick Start Manual page 9

7. When powered by the computer, the projector does not start up when you press the
power button on the projector.
• Ensure that your computer is working properly.
• Ensure that there is no condensation on the pogo pins.
8. When powered by an electrical outlet, the projector does not start up when you press
the power button on the projector.
• Ensure that the power adapter is working properly.
• Ensure that there is no condensation on the plug.
9. The projector shuts down after working for a while.
• If the projector is powered by an electrical outlet, ensure that there are no
miscellaneous items next to the outlet.
• Ensure that the electrical circuit is not overloaded and there is good air circulation
around the projector so that it is not overheated. The optimal operating
temperature of the projector is from 10°C (50°F) to 35°C (95°F).
10. If there are two or more sets of ideacentre 610S computers placed in close proximity,
• the Lenovo mini projector may be detected by another ideacentre 610S computer
and pairing has to be carried out again.
Press the wireless reset button on the projector and hold it for approximately one
second. Then, the projector will start to pair with the next available ideacentre
610S computer.
• the ideacentre 610S computer may be detected by another Lenovo mini projector
and pairing has to be carried out again.
Press the wireless reset button on the computer and hold it for approximately one
second. Then, the computer will start to pair with the next available Lenovo mini
projector.