Lenovo ThinkPad Stack Mobile Projector Tips

ThinkPad Stack Mobile Projector Tips
1. Recommended Stack Sequence:
Notes:
 The hard disk drive can be recognized by the projector only when it is stacked under the
projector.
 It is recommended that you connect the Lenovo 65W Travel AC Adapter when using the
stacked devices together.
2. Audio Output Tips:
When the projector and Bluetooth speaker are stacked together:

There is no sound when I play audio from the projector. Check the following to solve the
problem:
- Ensure that the Bluetooth speaker is turned on.
- If the Bluetooth speaker is connected with other devices, disconnect it.
- If the Bluetooth speaker is connected with a 3.5-mm (0.14-inch) aux-in cable,
disconnect the cable.

You can use the Bluetooth speaker to adjust the volume only. To control the play or pause
function, use the projector.
3. Power Supply Tips

Charge the projector with the Lenovo 65W Travel AC Adapter when you use the projector for
the first time.

The power bank can only support up to four stack devices working together. It is
recommended that you do not stack the projector and the router at the same time.

Use the Lenovo 65W Travel AC Adapter to charge the projector and other stacked devices.

The power bank can provide power for the projector to work, but cannot charge the internal
battery of the projector.
4. Battery Charge Duration Tips:

When the projector is not stacked with the ThinkPad Stack 10000mAh Power Bank, it takes
three hours to charge the projector from 5% to 100% capacity.