Related Documentation To Iec 61850 - ABB Relion 650 series ANSI Manual

Section 2
Introduction to IEC 61850
2.1.1
22
Detailed information regarding the IEC61850 implementation of the IED 650 is described
inside the conformance documents.
• MICS, Modeling Information Conformance Statement, contains the declaration of
the used logical node types.
• PICS, Protocol Information Conformance Statement, contains the details and what is
supported regarding protocol facilities.
• PIXIT, Protocol Extra Information, contains additional information on how the IEC
61850 is implemented and used.
• TICS, Tissue Information Conformance Statement, contains the supported Tissues,
which are handled in the Tissues process as defined by UCA, Utility Communication
Architecture forum. The Tissues handling is found in http://
www.tissue.iec61850.com.
The conformance documents are unique for each product release and refer to each other;
the identities included in the related documents refer to a specific version of the 650 series.
The communication profile in IEC 61850 uses the MMS standard, which uses Ethernet
and TCP/IP to handle the information transport within the substation.
The data modelling uses the concept of logical nodes to identify the published information
for communication. The standard defines a set of logical nodes, each representing a
communication view of a process function with a number of data objects. For example, a
transformer differential - or line differential protection, because the standard defines only
a differential protection. Therefore, it is possible to adapt the logical node, which is
defined in the standard, as a logical node class. The standard defines methods to describe
the actually used logical node as a logical node type which is then based upon the logical
node class. This allows all partners to interpret the logical node type information because
the description is completely given in the standard. The type description of all logical
nodes is part of the Data Type Template (DTT) section in the SCL description file of a
station or the IED.
Besides the information about the configuration of the communication facilities, this
manual contains the full description of all logical nodes available in the 650 series IED.
The information about the logical nodes and their data objects may be used to identify
which signals are available for the functions as described in the technical manual. The link
to the technical manual is done in the logical node tables by listing the signal name as given
in the function block, or as seen in PCM600 or the LHMI.

Related documentation to IEC 61850

Use the latest revision of the documents listed, unless stated otherwise.
1MRK 511 281-UUS A
650 series ANSI
Communication protocol manual